watex.utils.coreutils.fill_coordinates#

watex.utils.coreutils.fill_coordinates(data=None, lon=None, lat=None, east=None, north=None, epsg=None, utm_zone=None, datum='WGS84', verbose=0)[source]#

Assert and recompute coordinates values based on geographical coordinates systems.

Compute the couples (easting, northing) or (longitude, latitude ) and set the new calculated values into a dataframe.

Parameters

  • data (dataframe,) – Dataframe contains the lat, lon or east and north. All data don’t need to be provided. If (‘lat’, ‘lon’) and (east, north) are given, (’easting, northing’) should be overwritten.

  • lat (array-like float or string (DD:MM:SS.ms)) – Values composing the longitude of point

  • lon (array-like float or string (DD:MM:SS.ms)) – Values composing the longitude of point

  • east (array-like float) – Values composing the northing coordinate in meters

  • north (array-like float) – Values composing the northing coordinate in meters

  • datum (string) – well known datum ex. WGS84, NAD27, etc.

  • projection (string) – projected point in lat and lon in Datum latlon, as decimal degrees or ‘UTM’.

  • epsg (int) – epsg number defining projection (see http://spatialreference.org/ref/ for moreinfo). Overrides utm_zone if both are provided

  • utm_zone (string) – zone number and ‘S’ or ‘N’ e.g. ‘55S’. Defaults to the centre point of the provided points

  • verbose (int,default=0) – warning user if UTMZONE is not supplied when computing the latitude/longitude from easting/northing

Returns

  • - `data` (Dataframe with new coodinates values computed)

  • - `utm_zone` (zone number and ‘S’ or ‘N’)

Examples

>>> from watex.utils.coreutils import fill_coordinates
>>> from watex.utils import read_data
>>> data = read_data ('data/erp/l2_gbalo.xlsx')
>>> # rename columns 'x' and 'y' to 'easting' and 'northing'  inplace
>>> data.rename (columns ={"x":'easting', "y":'northing'} , inplace =True )
>>> # transform the data by computing latitude/longitude by specifying the utm zone
>>> data_include,_ = fill_coordinates (data , utm_zone ='49N' )
>>> data.head(2)
easting   northing   rho  longitude  latitude
0   790752  1092750.0  1101        113         9
10   790747  1092758.0  1147        113         9
>>> # doing the revert action
>>> datalalon = data_include[['pk', 'longitude', 'latitude']]
>>> data_east_north, _ = fill_coordinates (datalalon )
>>> data_east_north.head(2)
pk  longitude  latitude  easting  northing
0   0        113         9   719870    995452
1  10        113         9   719870    995452